FOUR WINDS INTERNATIONAL Class A, Руководство пользователя

Страница: 45 / 108

FOUR WINDS INTERNATIONAL
CONTROLS AND OPERATIONS
44
Automatic Leveling And Retraction Procedure
Make sure there are no obstructions in the extend or retract paths of the jacks.
Keep all people clear of the vehicle while operating the leveling system.
Do not allow excessive motion in the motor home during the Auto-Level operation. This could cause the system
to level improperly.
1. TURN ON POWER . The power to the unit must be turned on. You need to have the ignition
key in the
ON
position and the parking brake must be set to turn the control panel on. Push
the POWER touch pad to engage power. The power touch pad should be lit when power is
on.
2.. PRESS THE AUTO-LEVEL TOUCH PAD. The system will automatically level your
vehicle. The control panel will send out a series of beeps to let you know that
AUTO-LEVEL is operating. When completed, the panel will signal a successful Auto Level.
After ten minutes, the panel will enter sleep mode.
3. RETRACTING THE JACKS. Your Equalizer System provides you with the ability to retract
the jacks using the ALL RETRACT feature or the UP touch pads for each jack. Press and
release ALL RETRACT touch pad. All jacks will automatically retract. The jacks are retracted
when all of the LED'S have gone out. Depending on the vehicle, full retraction may take up to
90 seconds.
Note: The null, or level position has been preset at the factory. However, if you want to
change the setting, or if the motor home has been dormant for more than 60 days
you may need to reset the null. Refer to the automatic hydraulic levelers owner's
manual for detailed information regarding the proper procedures to do this.
TURN ON POWER PRESS AUTO-LEVEL TOUCH PAD RETRACTING THE JACKS
CAUTION