FOUR WINDS INTERNATIONAL 2007 Presidio, Руководство пользователя

Страница: 137 / 173

PRESIDIO
As with any mechanical system, the plumbing is subject to the development of problems.
Most of these problems can be greatly reduced if not altogether eliminated by following a
schedule of planned inspections and maintenance. Neglect of proper maintenance procedures
is the usual cause of most water system problems.
Road vibrations and shocks, as well as excessive pressure from some city water sources are
the main physical causes of water system damage. It is important to inspect all plumbing joints
and fittings often for cracks and leaks. Water leaking from a plumbing joint can cause
considerable damage if left unchecked.
A leak in the fresh water system should be suspected whenever the pump is continuously
running and all faucet's and valves are closed. When the leaking fitting has been identified,
attempt to stop the leak by tightening. DO NOT over tighten. Plastic fittings rarely need to be
tightened with a wrench. If these fittings leak after being tightened by hand, disconnect the
fitting and check for dirt, scale, or other foreign substance which may be causing the leak. Clean
the fitting thoroughly and reinstall. If leaking persists, shut off the water supply until the fitting
can be properly replaced. Check with your dealer for correct method of replacement, and
replacement parts.
Proper winterization procedures of plumbing systems will normally be all that is necessary to
prevent the damage caused by freezing. Freezing damage can harm any component of the
system, including the water tanks, toilet, pump, and all piping. Be sure to follow the
winterization procedures outlined in this manual. Also be sure to discuss any additional
precautions that should be taken to winterize the water systems with your dealer.
Local climates vary; and winter maintenance needs may be affected.
Be sure to read the literature supplied with plumbing components, such as the pump, for
troubleshooting tips. Also remember that it is possible for an electrical problem to cause water
system problems. Lack of power to the pump can be caused by a variety of reasons. If you are
unsure of how to locate and/or repair a plumbing problem, contact your dealer.
* Capacities are approximate and specifications are subject to change without notice.
10-9
WATER SYSTEMS
TANK CAPACITIES
WATER SYSTEM MAINTENANCE & TROUBLESHOOTING
Floor Plan 39B 39C 39D 39E 39F
Fresh Water Tank 90 gallons 90 gallons 90 gallons 90 gallons 90 gallons
Black Water Tank 68 gallons 68 gallons 68 gallons 68 gallons 68 gallons
Gray Water Tank 70 gallons 70 gallons 70 gallons 70 gallons 70 gallons