FOUR WINDS INTERNATIONAL 2007 Presidio, Руководство пользователя

Страница: 33 / 173

PRESIDIO
This combination Smoke/Carbon Monoxide Alarm has two separate alarms. The CO alarm is
not designed to detect fire or any other gas. It will only indicate the presence of CO gas at the
sensor. CO may be present in other areas. The smoke Alarm will only indicate the presence of
smoke that reaches the sensor. The Smoke Alarm is not designed to sense gas, heat or flames.
NOTE: During normal operations the Power/Smoke LED flashes Green once per minute, and
the CO LED is off.
Refer to the Combination Carbon Monoxide & Smoke Alarm User’s Manual within your Owner’s
Packet for detailed setup information.
DO NOT stand close to the alarm when the horn is sounding. Exposure at close range
may be harmful to your hearing. When testing, step away when the horn starts
sounding.
Never use an open flame of any kind to test this unit. The built-in test switch accurately
tests the unit’s operation as required by Underwriters Laboratories, Inc. (UL).
TEST: It is important to test this unit before each trip and once every week to ensure it is
working properly. Using the test button is the recommended way to test this Smoke/CO Alarm.
You can test this Smoke/CO Alarm two ways:
1. Manually: Press and hold the Test/Silence button on the alarm cover until alarm voice
says “Testing” (typically 3-5 seconds).
2. Using Your Remote Control: Standing no further than 20 feet (6 meters) away from the
Smoke/CO Alarm, aim the IR remote at the alarm and press the CHANNEL or
VOLUME button until alarm voice says “Testing”.
If the alarm does not respond to your remote control, there may be an obstruction between you
and the alarm, you may be standing to far away, or your remote control may not be compatible.
3-7
IDENTIFICATION & SAFETY
Programming the Alarm
Testing Procedure