background image

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues, keep away from

the appliance and immediately call

your gas supplier or fire department.

DANGER

WARNING: 

For Outdoor Use 

Only.

CAUTION:

Installer: Leave the instruction manual 

to the user for future use.

Consumer: Please keep this manual

for future reference.

Do not store or use gasoline or

other flammable vapors and liquids

in the vicinity of this or any other

appliance.

WARNING

An LP-cylinder not connected for use 

shall not be stored in the vicinity of 

this or any other appliance.

WARNINGS AND CAUTIONS

Read the instructions before use. This appliance must be installed in accordance with such

regulations as are enforced.

 

Do not try to light the appliance.

Do not touch any electrical switch; do not use any phone in the vicinity of this product.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s

instructions.

If you cannot reach your gas supplier, call the fire department.

WARNING: 

CARBON MONOXIDE HAZARD

Improper installation, adjustment, alteration, service or maintenance can

cause injury or property damage. Read the installation, operation and

maintenance instructions thoroughly before installing or servicing this

equipment.

 

WHAT TO DO IF YOU SMELL GAS?

Installation and service must be performed by a qualified installer, service agency or gas 

supplier.

!

This appliance can produce carbon monoxide which 

has no odor.

Using it in an enclosed space can kill you.

Never use this appliance in an enclosed space such

as a camper, tent, car or home.

2

Содержание 227770


























Отзывы: