F8L10T LoRa Terminal User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 16 of 18
Add
:
11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
http://en.four-faith.com
Tel
:
+86 592-5907276 Fax
:
+86 592-5912735
Figure 3-2 configuration interface
Column display serial parameters currently open serial port settings in the serial port
parameters,please choose the correct value of this configuration, at the same time, open the serial
port. The serial port parameter settings column if the right button is displayed as "closed serial".
That serial port has been opened, otherwise please open the serial port.
The equipment again after power, configuration software f8l10t into the configuration state,
and automatically load the current configuration parameters of equipment, in the area on the right
side of the display parameters, thus can start all configuration parameters in the configuration
F8L10T, as shown in Figure 3-2.
3.3 Detailed parameters
3.3.1 serial port configuration
It can configure the baud rate, data bit, parity bit and stop bit of the communication serial
port.
903-927