User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 12 of 42
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
Installation of SIM/UIM card:
Firstly power off the router, and press the out button of the SIM/UIM card outlet with a needle
object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into the card
sheath (Pay attention to put the side which has metal point outside), and insert card sheath back to
the SIM/UIM card outlet.
Warning:
Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the router tightly.
Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced!
Installation of cable:
The router supports RS232 interface and 10/100M Ethernet interface. These two interfaces
both adopt RJ45 outlet and distinguish by the sign on panel. The sign of the RS232 interface is
“Console” and the sign of the 10/100M Ethernet interface is “ETH”.
The router is equipped with a network direct cable and a console cable (optional).
Insert one end of network direct cable into RJ45 outlet with sign “ETH” of the router, and
insert the other end into the Ethernet interface of user’s device. The signal connection of network
direct cable is as follows:
RJ45-1
RJ45-2
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
