F3B3X Series Router User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 57 of 94
Add
:
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
:
//www.fourfaith.com Tel
:
+86 592-6300326 6300325 6300324 Fax
:
+86 592-5912735
Type:
to choose IPSEC mode and relevant functions in this part, supports tunnel mode client,
tunnel mode server and transfer mode currently
Connection:
this part contains basic address information of the tunnel
Name:
to indicate this connection name, must be unique
Enabled:
If enable, the connection will send tunnel connection request when it is reboot or
re-connection, otherwise it is no need if disable
Local WAN Interface:
local addresss of the tunnel
Remote Host Address:
IP/domain name of end opposite; this option can not fill in if using tunnel
mode server
Local Subnet:
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this option can
not fill in if using transfer mode
Remote Subnet:
IPSec opposite end protects subnet and subnet mask, i.e.192.168.7.0/24; this
option can not fill in if using transfer mode
Local ID:
tunnel local end identification, IP and domain name are available
Remote ID:
tunnel opposite end identification, IP and domain name are available
Detection:
this part contains configure information of connection detection
Enable DPD Detection:
enable or disable this function, tick means enable
Time Interval:
set time interval of connect detection (DPD)
Timeout:
set the timeout of connect detection
Action:
set the action of connect detection
Advanced Settings:
this part contains relevant setting of IKE, ESP, negotiation mode, etc.