The power supply should be cut off immediately if liquid
enters the inside of the machine or if the instrument suffers a
major mechanical impact. The user should contact after-sales
service as soon as possible.
Causes
‘
System Hang’
Sensor is damaged/
open circuit fault
Solution
Restart the device
Contact supplier
NO.
6
Issue
Operation can
’
t stop
automatically after
opening the door
Remove obstacle, and
contact supplier if the
obstacle can
’
t be removed
Remove obstacle, and
contact supplier if the
obstacle can
’
t be removed
Reload the magnetic
rods sleeves or change
the magnetic rods
sleeves to suitable ones
Reload the deep well
plates or change the
deep well plate to
suitable ones.
Obstacle stops robot
arm movement
Obstacle on the magnetic
rod sleeves rack
Magnetic rod sleeves not inserted
correctly, or the sleeves used are
not suited for the device.
Deep well plates are not
positioned correctly, or the plates
used are not suited for the device
7
I
Cannot complete
Auto-Check, or
the device stops
during operation
with abnormal
noise
33
