Copy step & Paste step (Copying and replicating an existing step)
Useful if you want to copy an existing step and then edit step parameters.
Choose a step, click “Copy step” and then “Paste step” to replicate
the step. Once the new step is created edit step parameters by long
pressing, to enter ‘Edit Step’.
Delete Step
Choose a step and click “delete step” to delete it if needed.
Following are the editable parameters in each step
•
Step:
Each step completes single or multiple functions, such as stirring,
magnetic bead collection, waiting, pause, heating, etc., and each function
can be individual or in combination. The extraction process will start
from step 1, move to step 2 and so on.
Each step can be in different wells or the same wells, and the process
eters can be set using the buttons at the bottom. The process parameter
values should be within the recommended range (where applicable,
"0" is off, and "1" is on.)
•
Well:
1-6 wells refer to the well positions on the left-hand side of the
21
