Four E's Scientific CF0201002 Скачать руководство пользователя страница 2

 

Safety Instructions                                                                                                                   

 

For your protection 

 

 

 

 

Read  the  operating instructions in full  before  starting  up  and 
follow the safety instructions when in use.

 

 

Ensure that only trained staff work with the centrifuge. 

 

Do not operate the device in any manner not described in this user 
manual. When in doubt or have any trouble, ask for help.     

 

It

’s important to be alert for unexpected incidents. Be careful when   

operating this centrifuge. 

 

Never use explosive or flammable samples. 

 

Do  not  install  the  centrifuge  in  or  near  places  where  inflammable 
gases are generated or chemicals are stored.   

 

Do not place dangerous materials 30cm around the centrifuge.   

 

Prepare all necessary safety measures before using samples that 
are 

toxic, 

radioactive 

or 

contaminated 

with 

pathogenic 

micro-organisms. Use of these is at your own responsibility.   

 

If the centrifuge, rotor and accessories have been contaminated by 
solutions with toxic, radioactive or pathogenic materials, clean them 

per the decontamination procedure specified.   

 

To avoid electrical shocks, insure hands are dry before handling the 
power cord when turn on/off the power switch.   

 

For safety, do not be within 30cm around the centrifuge when it

’s in 

operation. 

 

When the rotor is rotating, never release the door lock.   

 

Unauthorized repairs, disassembly or modifying the centrifuge are 

strictly prohibited.   

 

The machine must be placed on a firm and flat table.   

 

Make sure the centrifuge is horizontal before running. 

 

Make sure the angle between the door and the cover is bigger than 
70 degrees when the door is open.     

 

Do not put your fingers or  hands  between the door  and the cover 
when the door is open. 

 

Do not move or relocate the centrifuge when running.   

 

If  fluid  spills  in  the  rotor  chamber,  please  promptly  clean  and  dry 
with a dry cloth to avoid sample contamination.   

 

Make  sure  to  remove  any  objects  and  fragments  of  the  tubes 
dropped inside the rotor chamber before running the centrifuge.   

 

Be cautious with rotor. 

Always  check  corrosion  and  damages  on  the  rotor  surface 

before using it. Do not use the rotor if an abnormity is found.   

Do not set the speed beyond the allowable minimum speed of 

the  rotor  kits  (rotor  or  adapter).  Make  sure  to  run  it  below  the 

allowable minimum speed.   

Do not exceed the allowable imbalance. 

Use the rotor and the tubes within their actual capacities.   

Make sure the rotor is tightened on the lid. 

 

Installation 

 

 

Unpack the device carefully and check for any damages which may 
have arisen during transit. Please contact the manufacturer 

/supplier for technical support. 

 

Place the centrifuge on a firm, flat and level platform and make sure 
it stand firmly.   

Содержание CF0201002








Отзывы: