Fountaine Pajot ISLA 40, Руководство пользователя

Страница: 34 / 68

MANUEL PROPRIÉTAIRE / ISLA 40
Systems
34
ELECTRICITY (NEXT)
Switch the cut-outs of the 12 V DC network to OFF
Switch the circuit breakers of the 12 V DC network to OFF
Switch the battery charger to OFF (depending on the options)
Switch the converter or combi to OFF (depending on the options)
To disassemble the battery, first locate the location of the «+» pole and the «-» pole, to
facilitate the assembly of the new battery.
Unplug your used battery, always starting with the «-»:
V
Unscrew the bolt of the negative clamp.
V
Slide the clamp out of the terminal.
V
If necessary, label the cable to identify the negative from the positive.
V
Unscrew the positive clamp in the same way.
V
Unscrew all the screws or bolts of the battery.
V
Put them in a small box so as not to lose them.
V
Lift the battery to remove it from its location.
It is recommended to observe the safety instructions indicated on the battery
during assembly:
V
Do not smoke
V
Do not put tools on both terminals at once
V
Observe the assembly/disassembly instructions
V
Observe the battery safety symbols
V
Put the new battery in place of the old battery: be sure to put the «+» and «-»
terminals on the right side!
V
Screw in the screws and bolts that hold the battery in place.
V
Connect the «+» clamp first by tightening the bolt with the key.
V
Connect the «-» clamp in the same way.
Switch the cut-outs of the 12 V DC network to ON
Switch the circuit breakers of the 12 V DC network to ON
Switch the battery charger to ON (depending on the options)
Switch the converter or combi to ON (depending on the options)
Before doing anything about 12V DC batteries
Installation of new batteries
Safety advice
After connecting the 12V DC batteries
Precautions to take for changing the batteries:
1
1
2
2
3
3
4
4
a
V
Starboard battery park
b
V
Port battery
Battery recycling is mandatory
a
b