fountain mercury Express Cruiser 2005, Инструкция по эксплуатации, техническому обслуживанию и гарантии

Страница: 60 / 92

corresponding tank you want to empty.
4.
When the tank is empty, release the OVERBOARD DIS-
CHARGE switch. Turn the Y-valve to the original position and close
the waste thru-hull.
Dockside Pump-out:
The services of a dockside pump out station is
needed to empty the holding tank. Be sure the
hose is inserted in the deck plates labeled
WASTE.
Fresh Water Supply
Water for cabin galley and sink is supplied by an electrical pump and
water tank. Tank level is monitored by indicator lights for full or
empty. Tank is filled by a customer-supplied hose. Dock side pres-
surized water can be utilized to provide endless water while docked.
See quick reference for fitting location. Note: Use an approved hose
for filling a potable water tank in any vessel.
When using the water supply provided at the docks there is no need
to turn on the FRESHWATER PUMP breaker. The water supply is
already pressurized and will support all systems in the boat. The
dock side water WILL NOT fill the on board freshwater tanks. Attach
the dockside water hose to the water inlet.
Onboard Fresh Water System Operation:
Turn the FRESHWATER PUMP breaker on. The
freshwater gauge on the main panel will not operate
if the breaker is not on.
Fill the fresh water tanks as needed using the aft
“water” fill on the port side of the deck.
Warning: Water system must be purged of winterization
fluid used during shipping of the boat during the winter
months. Pink fluid should be run out of the water tap
and flushed out.
56
Electrical System & Optional Equipment