Fotric 320F Series, Руководство пользователя

Страница: 59 / 123

55
The ‘Partial emissivity setting’ feature is available through touch-screen and
press-button. If you need to set specific emissivity for different ROIs, please follow
the procedures as below:
1. touch-screen operation
1
）
Click on the ROI you want to set emissivity on
2
）
Click ‘ ’ on the bottom of the screen, the emissivity button ‘ ’ will
appear.
Click to display the emissivity interface:
On the left side is ‘on/off’;
On middle, is the emissivity customizing page, the value ranging from 0.01 to 1.0;
On the right side is the emissivity material table.
3
）
Click on the left side to turn it on
4
）
If the emissivity of the material is known, you can set it by scrolling in the
middle section of the screen
5
）
You can also find the matching material by scrolling on the right side of the
screen
6
）
After setting the ROI partial emissivity, click on the blank part on the screen
and finalize the setting.
2. On-Panel Operation
1
）
Click on the ROI you want to set emissivity on
2
）
Click the ‘OK’ button, then the emissivity button ‘ ’ will appear.
Click to display the emissivity interface:
On the left side is ‘on/off’;