Fotric 320F Series, Руководство пользователя

Страница: 16 / 123

12
battery-warning window will pop up; If the operation continues, the battery-
warning window will pop up again when the battery level is below 10%.
3. If the thermal camera’s battery level is below 20% during use, the battery-
warning window will pop up; if plugged in the power charging adaptor, the
battery warning window will disappear.
3.1.3 Plugging out the battery when the camera is on charging
1. When the camera is turned off, and no battery inside:
If connected to a power adaptor or computer via USB cable, the camera will not
be turned on.
2. When the camera is turned on, and the battery is inside;
if the battery is plugged out when the camera is being charged, a prompt
window will pop up: “Battery not detected, auto shutdown in 10 seconds”, and
start 10 seconds countdown.
If plugged battery within 10 seconds, the camera will not shutdown
3.1.4 USB interface functions
The thermal camera’s USB Type-C interface to support 3 functions:
1
）
Support MTP connection to computers, for reading and quickly transfer data
from the TF card.
2
）
Support real-time communication with PC and camera, for full-radiation
video streaming and analysis. When the camera is on video streaming, the
camera’s screen will be locked from touch-screen or panel operations.
3
）
Support battery charging in the camera. When the camera is turned off with
the battery in, the USB cable can still support charging, but no data transfer or
video streaming.
4
）
When connect the camera to a computer via USB cable, the default mode