Operating instructions:
1. How to set up the light
(1) Insert the dovetail flange on the bottom of the light into the dovetail groove on the yoke from back toward
the front.
(2) Tighten the yoke mounting screw to secure the yoke to the bottom of the light.
(3) To mount on a light stand: loosen the stand mount locking screw by turning counterclockwise. Place the
yoke onto the compatible light stand. Turn the stand mount locking screw clockwise to secure the yoke to the
light stand.
Dovetail groove for the
L-type yoke
L-type yoke mounting screw
Stand mount locking screw
(4) Adjust the light to the desired angle by loosening the yoke angle adjustment handle by turning counterclockwise.
Move the light to the desired angle, then tighten the yoke angle adjustment handle by turning clockwise.
Yoke angle adjustment handle
2. Reflector/accessory installation and removal
(1) Align the red dot on the reflector/accessory with the red dot on the front of the light. Push reflector/accessory in
and turn clockwise until you hear a “click”; the reflector is now locked into place.
(2) To remove the reflector/accessory, pull the accessory lock button toward the rear of the light fixture. Then turn
the reflector/accessory counterclockwise until the red dots are aligned and pull away from the light.
Accessory lock button
POP SPOT V.2
POP SPOT V.2
