Fostex MR-8MKII, Руководство пользователя

Страница: 72 / 154

72
MR-8mkII Owner’s Manual (Track bouncing)
You can bounce tracks 1 through 8 to tracks 7/8 of a new song. A new song is automatically
created when executing track bouncing (
<Note>: In the “1-8 > NEW SONG” mode, you cannot bounce
the desired part of a song by using the track bouncing and auto punch in/out functions together
).
Before executing track bouncing, you can rehearse it. While rehearsing track bouncing, you can
control the playback level, panning and reverb (or delay) send setting of each source track, as
well as apply the mastering effect to the mixed L/R signals. We recommend to make rehearsal
thoroughly until you are satisfied with the sound. The following assumes that the song you are
going to execute track bouncing is loaded.
During rehearsal and actual track bouncing,
the level meters on the screen show the fol-
lowing signal levels. 1) Raise the [MASTER] fader to the " " position.
Set all the track faders down to the minimum
position.
2) Press the [PLAY] key to start playback from the
beginning of the song.
3) While playing back the song, adjust playback
levels of tracks 1 through 8 using the track
faders.
You can also adjust panning for tracks 1
through 4 and apply the reverb or delay to
these tracks, as well as apply the mastering
effect to the mixed sound.
During rehearsal and actual track bouncing,
the track faders and [MASTER] fader control
the following signal levels.
Playback levels of tracks 1 through
8 for bouncing. Faders
1 through 8
[MASTER]
fader
Recording master levels of bounc-
ing.
Playback levels of tracks 1 through
8. Meters
1 through 8
Meters
L and R
Output levels of STEREO OUT (=
recording levels of bouncing)
4) After finishing rehearsal, press the [STOP] key
to stop the recorder and locate it to the
beginning of the song.
Do not move the controls and faders after
finishing rehearsal.
By raising the [PHONES VOL] control, you can
hear the bounced signals.
Use the track faders (1 through 8) to control
the track output levels, and use the [MASTER]
fader to adjust the master recording levels of
the bounced signals appropriately while check-
ing meters L/R.
See "Using effects" on page 57 for details about
the delay/reverb and mastering effects.
Rehearsal of track bouncing
MAX
MIN
MAX
MIN
REC SELECT
1 2 3 4 5/6 7/8 MASTER
R L
PAN
L R L R L R
0 10
EFFECT SEND
10 0 10 0 10 0
BRIT STACK US METAL 60'S COMBO
MIC
TUBE CONDENSER DYNAMIC
INPUT A
LINE MIC MIN MAX LINE MIC
DISTORTION
GUITAR
UNBAL
BAL
UNBAL
/GUITAR
PEAK
TRIM TRIM
BAL
INPUT A INPUT B
PHONES VOL
L
ST OUT
R
2
PHONES
1
MIN MAX
EFFECT
REVERB/DELAY TIME
MIN MAX
HALL ROOM
PLATE DELAY
LOCATE REC END
A-B PLAY
LOCATE ABS ZERO
DELETE +-_0 YZ9 VWX8 STU7
PLAY STOP RECORD REWIND F FWD
PQR6
UNDO/REDO PLAY MODE STORE A / IN B / OUT
LOCATE
MNO5 JKL4
BRIGHT NATURAL POWERFUL MENU/ENTER
MASTERING
GHI3 DEF2 ABC1
7/8
WAV FILE
STEREO 1-4
1-6 NEW
SONG
1-8
GUIDE
RHYTHM
CONTRAST
TIME BASE
SELECT
BOUNCE
INPUT A SELECT
AUTO PUNCH
5/6
7/8
AMP SIMULATION
MIC SIMULATION
PEAK
1,3
2
3
3
3
4
3
4
Bouncing tracks 1 through 8 to a new song