Foster PITAGORA 2439.001, Руководство пользователя, Страница: 13 / 20

13 F15
Fig. 3
Fig. 4
X
±
5
STEP 3
3a Insert 5 (five) FISCHER plugs into the holes
made as described in point
2a
.
3b Fix the lower bracket in place with the screws,
not forgetting to insert the washers.
3c Fix the upper bracket in place with the screws.
ATTENTION!
Use a level to make sure that the brackets
have been correctly positioned.
STEP 4
4a
Hang up the extractor hood by inserting the two
screws X into the slots in the lower bracket.
4b Using a screwdriver with a cross-headed tip,
adjust the two screws so that the extractor hood
is perfectly level
ATTENTION!
Place the level on top part of the extractor hood.
Make sure that the extractor hood is positioned
on a level with the mark made on the wall as
described in point
1a
.
If necessary, regulate the position with the
screws described in point 4b .