Foster EPREM 1/2H, Руководство по обслуживанию

Страница: 4 / 20

Basic User Functions
Button 1
Button 2
Button 4
Button 3
Set Unit to Standby
Press any button (1, 2, 3 or 4)
Press button 1 (Off)
All relay outputs fall low. Display will show
Set Unit to Run
Press button 4
System will restart
Check Set Point (Low Temperature Band)
Press any button (1, 2, 3 or 4)
Press button 3. (Temp)
Press button 1(-) or 2 (+) to raise or lower the set point.
Press button 4 (<<) to exit to ‘User Main Menu)
View Ancillary Temperatures (If relevant Probes are fitted)
3
Press any button (1, 2, 3 or 4)
Press button 4 for ‘Service’ menu.
Press button 1 for ‘Info’ menu.
Use buttons 1 ( ) and 2 ( ) to view temperatures
(Text Air Evaporator Condenser Food Tlo
Thi Text )
Tlo indicates the lowest temperature the machine has achieved.
Thi indicates the highest temperature the machine has achieved.
This information is useful when checking on the possible cause
of iced up evaporators.
(If the relevant probe is not fitted display shows ---)
Press button 4 (<<) to exit to ‘User Main Menu)
Basic ‘User’ Adjustments
Increase Set Point. (High Point of Temperature Band)
Press any button (1, 2, 3 or 4)
Press button 3 for ‘Temp. Set’ menu.
Use button 2 (+) to adjust setting to required value.
Press button 3 (OK) to save and exit.
Press button 4 (<<) to exit without saving.
Display will return to ‘User Main Menu’.
Note: Maximum value is dependant upon Maximum Temperature Set-Point
parameter setting.