Foshk HP3000, Руководство по эксплуатации

Страница: 3 / 20

Thank you for your purchase this professional weather station. This device can receive signals up
to at most 8 outdoor sensors and. All the sensors measure temperature, humidity, heat index and
dew point and transmit to the console and displayed in defined channels.
This manual will guide you step-by-step through setting up your device. Use this manual to
become familiar with your professional weather station, and save it for future reference.
3. Getting Started
Note: The power up sequence is performed in the order shown in this section (insert
batteries in the remote transmitters first, display console second).
3.1 Thermo-Hygrometer Sensor Set Up
Note : To avoid operating problems, please take note of battery polarity before/when inserting any
Alkaline Batteries (permanent damaged could be introduced by inserting the battery in wrong
direction). Do not use rechargeable batteries. We recommend fresh alkaline batteries for outdoor
temperature range between -20
℃
and 60
℃
and fresh lithium batteries for outdoor temperature
range between -40
℃
and 60
℃
.
1. Remove the battery door on the back of the thermo-hygrometer sensor as shown in Figure 4.
Figure 4
2. Channel Number: the weather station support up to eight sensors, and includes three
transmitters. To set each channel number, change Dip Switches 1, 2, 3 as referenced in
Figure 5.
3. Temperature unit of Measure: To change the sensor display units of measure (
℉or ℃
)
，
change Dip Switch 4, as referenced in Figure 5.
: Pull down the button : Pull up the button