Foshk HP3000, Руководство по эксплуатации

Страница: 4 / 20

Figure 5
4. Insert two AA batteries
5. Wait for seconds until temperature and humidity displayed on the LCD screen of sensors.
6. Verify the correct channel number (CH) and temperature units of measure are on the display,
as shown in Figure 6.
Figure 6
(1) Temperature
(2) Temperature units ((
℉or ℃
)
(3) Channel number
(4) Relative humidity
7. Repeat for the additional remote sensor, verifying each remote is on a different channel.
3.2 Display Console Set Up
1. Move the sensors about 1-3 meters away from the display console. With multiple sensor, make
sure all sensors are powered up
2. Power on the display console by connecting the power adapter. The different channels will