Foscam WS-7004, Руководство пользователя по установке и эксплуатации

Страница: 31 / 62

Page31
【 channel number 】 Choose the set motion detect channel.
【 enable 】 ■ means that the motion detect function is on.
【 sensitivity 】 Choose in the six options according to the sensitivity.
【 area 】 Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current
cursor area. Yellow block means the dynamic detect defensive area. Black block means the unfenced area.
You can set the area as followed, Drag the mouse and draw the area.
Picture 4.5 set the area
【 time section 】 Trigger the motion detect signal in the set time section. You can set according to week or set
uniformly. Each day is divided into four time sections. ■ means the set valid.
Picture4.6 set the time section
【 interval 】 Only one alarm signal is turned on even there are several motion detect signals in the set interval.
【 alarm output 】 Start the external equipment of corresponding linkage alarm when the motion detect alarm is
turned on.
【 delay 】 Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.
【 recording channel 】 Choose the recording channel (multiple option supportive). Trigger the video signal
when the alarm is turned on.
Note
： Set in the [recording setup] and perform the linkage recording. Start detecting video files in the
corresponding time section.