Foscam FLC/F41, Руководство пользователя

Страница: 53 / 82

51
If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test
mail.
If the test fails with one of the following errors after clicking Test, verify that the information you entered is
correct and again select Test .
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device.
3.5.4 Video
This section allows you to configure Video Encode settings, On screen display, Snapshot and IR LED settings.
3.5.4.1 Video Encode
This is main Encode video settings.