Menu Map
►
System Setup [new software]
This mode is designed for factory to upload software through USB port. Your product has been tested
before shipment. Just check local distributor’s web site if updated software is available.
►
System Mode [ xxx ]
Press MENU button till display reads “System Mode [XXX]”, then use UP/DOWN button to scroll
through” DMX, Slave, Auto, Sound.
►
DMX Mode
The unit can be operated in 3ch, 4ch or 6ch. Set DMX address according to the DMX mode selected.
►
Master/Slave Mode
For large venue, multiple systems can be run in sync as Master/Slave. Use DMX cables to link the
Drivers together.
1.
One of Ribbon Driver 4 in the daisy chain is to be set as Master and this Master must work under Auto
or Sound mode.
2.
Other drivers are to be set in Slave mode.
3.
Operate the Master Driver in Auto and Sound mode to run the whole system.
Содержание Ribbon Driver 800
Страница 1: ...FOS Ribbon Driver User s Manual...