SETUP
Mounting
Truss/ceiling /wall mounting are available for this small controller.
IMPORTANT!!!
Safety cables must always be used. The safety cable
must be capable of holding 10 times the weight of the fixture.
AC Power
The fixture is designed to work on 110V/230V 50Hz. Before applying power to a unit, check that
the source voltage matches the unit’s requirement.
Connection
Connect the wires of LED strip to terminator of Ribbon Driver correctly base on color code of
wire.
OPERATION INSTRUCTIONS
This fixture offers 4 working modes: DMX, Auto, Sound and M/S.
1.
Connect the fixtures to main power supply.
2.
Turn on power switch and LED indication on Control Panel is lit up.
3.
Wait for some seconds till system is ready.
4.
Press buttons to continue.
Содержание Ribbon Driver 800
Страница 1: ...FOS Ribbon Driver User s Manual...