ForU MN 3, Руководство по эксплуатации

Страница: 69 / 86

69
Issued: 23.01.2008
Removal and replacing the rear wheel:
Removing and replacing the rear wheel
must be carried out as described in the
chapter “Removing and replacing wheels -
4-wheel version“.
Place the wheel and spacer bushes
(3 + 4) in the steering fork.
Push the axle (5) into the steering fork
and the wheel.
Screw the axle self-locking nut (6) and
tighten it (size 17 mm). While doing this,
prevent the axle from turning using a
second ring spanner (size 14 mm).
Lower the FOR U.
Fitting the front wheel
Replacing the front wheel:
Lift the front end of the FOR U and
support it (see chapter 18.0).
Hold the axle (1) with a ring spanner
(size 14 mm) and remove the self-
locking nut (2; size 17 mm).
Pull the axle out of the steering fork and
the wheel.
Remove the wheel and spacer bushes
from the steering fork.
Front wheel
Removing the front wheel:
Secure the FOR U against rolling away.
Wheels - removal and replacement - 3-wheel version
Tools required:
1 x ring spanner, size 14 mm
1 x ring spanner, size 17 mm
17.3
Repairs
FOR U MN3/4