ForU MN 3 Скачать руководство пользователя страница 25

Страница: 25 / 86

Issued: 23.01.2008

Adjusting the handle:

Pull the handle (4) and turn into

position (5).

Adjusting the handle

Loosen the clamping lever (1).

Push the tiller forwards or backwards

into the required position (2).

Tighten the clamping lever (3).

Ensure that the tiller is engaged properly

by moving slightly forwards and
backwards.

Accident hazard due to
non-engaged tiller!

• Ensure that the tiller is properly

engaged after adjustment by
pushing it slightly forwards and
then backwards.

NOTE

the clamping lever is provided with an
adjustable handle.
After you have tightened the clamping
lever, put the handle into the position
shown in the photograph (a).

adjusting the tiller

the seat

FOR U MN3/4

Adjusting the tiller angle

Always adjust the tiller so that you can
reach all displays and controls easily at any
time. The tiller can be variably adjusted.

6.3

Adjusting

Содержание MN 3























































































Результаты поиска

Содержание MN 3

Отзывы:

Похожие инструкции для MN 3

Бренды по названию

Популярные бренды

ForU MN 3, Руководство по эксплуатации

Результаты поиска

Содержание MN 3

Отзывы:

Похожие инструкции для MN 3

Бренды по названию

Популярные бренды