ForU 3S Скачать руководство пользователя страница 51

Страница: 51 / 80

Issued: 08.01.2008

Accident hazard due to locking device not engaged!

• Ensure that the drive unit locking device audibly engages into

the chassis.

• Before inserting the battery case, ensure that the locking

device is correctly engaged.

NOTE

If the lock does not engage, then the lock counterstop on the
drive unit will have to be adjusted.
You can find information about adjustments in Chapter 16.7
„Repairs“.

Clamping and crushing hazard!

Pay particular attention to hazards caused by trapping and
crushing while carrying out this work.

2.) Fold the drive unit forwards.

Folding the drive unit in

12.4.1 Engaging the drive unit to the chassis

1.) Locate the chassis holding bolts (1)

into the guides (2) at the drive unit.

Connecting the chassis

12.4 After Transport - Reassembly

Working step summary:

1. Re-couple the drive unit.

2. Fold the tiller up again.

3. Unlocking the tiller.

4. Insert the battery case.

5. Fit the seat.

Transporting the FOR U

FOR U 3S / 4S

Содержание 3S

















































































Результаты поиска

Содержание 3S

Отзывы:

Бренды по названию

Популярные бренды

ForU 3S, Руководство по эксплуатации

Результаты поиска

Содержание 3S

Отзывы:

Бренды по названию

Популярные бренды