ForU 3S Скачать руководство пользователя страница 39

Страница: 39 / 80

FOR U 3S / 4S

Charging the

10.0

Charging the batteries

Please also see the information given in the chapter entitled “Things to
know“.

Charging information:

• The surrounding temperature should be between 10° and 30° Celsius.

The charging time will increase at lower temperatures.

Only use the original battery charger (included in delivery).

Only use the battery charger in a dry and well-ventilated room.

Do not cover the battery charger and ventilation slot while charging
batteries.

The battery charger has an automatic switch-off device which
prevents overcharging the batteries. Do not leave the battery
charger connected to the scooter for more than 24 hours.
- The batteries can be charged overnight.

Switch the FOR U off before charging the batteries.

•

When is charging required?

the battery charge display is in the red area

after the final journey of the day

at least once per week

•

Charging times:

Between 8 and 14 hours depending on current battery charge state.

NOTE

The battery charger is designed to be able to charge completely
discharged batteries within eight hours to 80% of their capacity.

10.1 Preparing the battery charger

Plug the mains cable plug (1) into the

jack socket (2) on the battery charger.

Connect the mains cable

Issued: 08.01.2008

Содержание 3S

















































































Результаты поиска

Содержание 3S

Отзывы:

Бренды по названию

Популярные бренды

ForU 3S, Руководство по эксплуатации

Результаты поиска

Содержание 3S

Отзывы:

Бренды по названию

Популярные бренды