ForU 3S, Руководство по эксплуатации

Страница: 11 / 80

11
Issued: 08.01.2008
Safety when handling batteries
Fire hazard!
• Do not cover the battery charger and ventilation slot while
charging batteries.
• Only use the battery charger in well-ventilated areas.
1.6
Accident hazard due to incorrectly bolted connections!
• If bolted connections have self-locking nuts, ensure
that these are replaced when reassembling.
• Do not replace self-locking nuts with normal nuts.
• If bolted connections have lock washers, check lock
washers when reassembling and replace if necessary.
Injury hazard due to improper assembly!
• Ensure that all components in the Scooter have been
correctly assembled.
• After assembly, check that all locking devices are holding
correctly.
Clamping and crushing hazard!
Increased hazards due to clamping or crushing result due to the
high component weight (such as batteries) during preparation
for transport and maintenance work.
• Always carry out any work to be done with great care.
• Always try to get help from a second person, especially when
stowing parts for transport.
• Only carry out any work described if you are used to working
with the tools required.
• Only carry out work using suitable tools.
Safety during transport, assembly and maintenance
If the scooter is transported in the vehicle when fully
assembled:
- no persons may sit on the scooter during loading!
- no persons may sit on the scooter during transport!
1.5
Safety information
FOR U 3S / 4S