7
6.
A minimum clearance of 150cm between the floor and the appliance if it is wall-mounted.
牆壁安裝式器具，建議爐底離地面
150cm
的距離。
7.
The appliances using flexible water tube should notice that the tube cannot be reused when it is
replaced with a new one the manual.
使用可拆卸軟管組件連接水源的器具，其使用說明應聲明使用隨器具附帶的新軟管組件，
舊軟管組件不能重復利用。
INSTALLATION PROCEDURE
安裝程序
WATER SUPPLY CONNECTION
水管接駁
1.
Fix the wall-mount bracket on the wall by screw. Position the water heater with 170cm from the
ground.
將熱水器的掛牆背碼用螺絲牢固在預先選定安裝熱水器的牆上位置，位置應距離地面約
170cm
。
2.
Hang the water heater onto the wall-mount bracket.
將熱水器掛在背碼上
。
3.
Close the water supply.
將水源龍頭關起
。
4.
Connect the water mixer to the unit by chrome & plated pipes and unit washers.(Diagram1)
利用提供之索母
,
將電鍍銅通與混合龍頭及爐身連接起
。
（圖
1
）
5.
Connect the water supply to the water inlet of water mixer. You should find the Cold Water
Valve with a Blue dot indication on the left, and the hot water valve with a Red dot on the right.
將來水管接上混合龍頭後中央入口處
，
面對固定後的龍頭左邊水掣應爲藍點
，
顯示爲冷水
開關掣
，
右邊有紅點顯示爲熱水開關掣
。
6.
Position the water mixer with about 150cm from the ground.
將花灑座安裝於離地面約
150cm
。
7.
Check all Pipe connections for leakage and turn on the water supply. Turn on the ‘Hot Water
Valve’ to fill up the water heater with water.
檢查所有接駁口，從新開啓水源，開啓混合龍頭的紅點熱水掣讓水注入爐內將爐膽內的空
氣順利排出。
