Fortress Technologies FJW50A11P, Руководство пользователя

Страница: 18 / 21

18
No
washing
Abnormal
draining
Abnormal
spin
Troubleshooting of washer
List of faults and inspections
Faults
Inspection Items
No water
flows in
!
If the power is off or the fuse is burned .
!
If the water supply is cut off or the water pressure is too low.
!
If the inlet hose is connected improperly and the water tap is turned off.
!
If the filtering screen of inlet valve is blocked by dirt.
!
If the coil of inlet valve is damaged. (The slight electromagnetic
sound is a phenomenon when the inlet valve is opened)
!
If the "Start / Pause" button is not pressed after the power
switch is on.
!
If the door lid is not closed.
!
If all clothes are piled at one side of barrel find there are too many
clothes.
!
If the washer is not placed in a stable condition or is tilted.
!
If the motor belt is loosened.
Note: During the spinning process, if washing are piled at one side of the spin barrel, it will cause
unbalance of the spin barrel and resulting in striking. At this moment, the built-in computer of
will detect this unbalance situation and will automatically correct it ( fill in water Washing ). the washer
However, if the unbalance situation is not removed after continuous three corrections,
The user has to manually place the clothes inside the barrel evenly.
When problems of the washer arise, please contact local service office or the sales service department
of our company and the user should not dismantle the machine without permission.
If the washer cannot function normally, or there are abnormal signals, please check and correct as
follows.
!
If the water drain hose is placed too high.
!
If the end of water drain hose is not connected to the collection tank.
!
If the internal rubber ring of the drainage valve is blocked by dirt.
!
If the power is off or the fuse is burned .
!
If the power supply voltage is too low.
!
If the water amount reaches the required water level.
(The washer will not work if the water amount does not reach the
required water level)
!
(It will only start to work If it is set to "PRESET" washing mode.
at the preset time)