![Fortress Technologies FJW50A11P Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/fortress-technologies/fjw50a11p/fjw50a11p_user-manual_2322501019.webp)
19
220V/50Hz
420W
5.0kg
5.0kg
X
X
520 530 886mm
(W*D*H)
0.03MPa-0.8MPa
33
kg
Specifications and technical
parameters of washer
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of whole machine
Washing mode
New water flow
Draining mode
Upper draining
Spin mode
Centrifugal spin
Following phenomena are not
faults of washer
Symptom
Causes
There are water leaks from
the water drain hose when
use for the fist time.
This is residue water after the performance test
in the factory.
Make up water during
washing process.
During the washing process, the water will be
automatically made up when the water level declined.
During the dehydrating
process, spin suddenly
stops and water filling and
rinsing start running.
This is because the clothes are at one side. The safety
switch starts to make up water, and stir while
running. The spin process will continu when the
clothes are in balance status. In case of failure of three
corrections of the washer, the buzzer will alarm. Please
manually adjust the balance of clothes.
The clothes are not
sufficiently dry after spinning
process.
Note All information is for reference only.
:
The heavier and thicker parts of the clothes
will cause uneven spin.
Содержание FJW50A11P
Страница 1: ...USER S Automatic ...
Страница 9: ...9 Installation of washer Installation of water inlet pipe at ...
Страница 21: ...21 ...