Fortis FS20FDMTBBA, Руководство пользователя

Страница: 13 / 20

Step 7:
Rear reflector
1. Loosen the screws on the rear reflector bracket and attach the rear reflector to the
seat post.
Note: It is important to check and adjust the position of the reflector. The reflector
must always be vertical (perpendicular to the ground) and pointed toward the rear
of the bike.
2. Check there is at least 7.62 cm of clearance between the top of the seat and the
top of the rear reflector. Tighten the screw on the rear reflector bracket.
Step 8:
Bell
1. Loosen the screw on the bell and attach it to right side of the handlebar in the
position shown below.
2. Secure the bell in place by tightening the screw.