Fortis FS20FDMTBBA, Руководство пользователя

Страница: 11 / 20

Step 5:
Seat post
1. The seat has been pre-assembled to the seat post by the factory.
2. Insert the seat post into the bicycle frame. Ensure that seat post minimum insertion
mark is completely inserted into the frame and not visible.
3. Adjust the seat position and tighten the quick release clamp at the desired height.
Note: Rotating the quick release nut clockwise while keeping the cam lever from
moving will increases the clamping force. Rotating the quick release nut counter-
clockwise while keeping the cam lever from moving will reduce the clamping force. Less
than half a turn of the nut can make the difference between a safe and unsafe amount
of clamping force.
4. Adjust angle of seat so that top of seat is parallel to the ground and comfortable to
the rider.
Note: Test the seat to pedal distance by having the rider sit on the seat. When the
rider’s leg is slightly bent, the ball of the foot should rest on the pedal when it is in its
lower position. If not, adjust the seat height accordingly.
WARNING:
If the seat is able to twist, the quick release nut is not tight enough
and should be adjusted.