Fortis FS20FDMTBBA, Руководство пользователя

Страница: 7 / 20

Step 2:
Front and rear fenders
1. Attach the front fender hanger and the front reflector to the fork crown.
2. Attach the rear fender hanger to the mid tube of the frame.
3. Make any necessary adjustments to the fenders and front reflector, then tighten
the screws to secure them in place.
Step 3:
Front brake adjustment
Note: The front V-brakes have been pre-installed at the factory, however they will need to be
adjusted after assembling the front wheel and fender.
1. Use the M5 Allen key to loosen the brake cable bolt and adjust the tension in each
brake arm. Ensure both sides are equally and properly tensioned.
2. After ensuring that the clearance between both brake pads and the rim is between
2-3mm, tighten the brake cable bolt.
Note: Do not ride the bike unless the brakes have been properly tested.