Fortis FS20FATEBKB, Руководство пользователя

Страница: 6 / 19

•
Tighten the handlebars stem lock screw using a hex/Allen key until they secure.
•
While holding the front wheels with your legs, tighten the screw, ensuring the screw
is completely fastened.
•
Close the clamp to lock the handlebars in place.
Note: It is recommended to use a torque wrench to tighten the screw between 20Nm -
24Nm. Do not exceed 24Nm.
•
Use the handlebar quick release to adjust the height of the handlebars until it is at
a suitable height for you. Ensure that the minimum insertion mark is completely
covered.
•
Pay attention to ensure all cables are not damaged.
Note: The handlebar quick release is designed to be operated using your hands. If it is
too tight or loose it can be adjusted using an Allen key.
Note:
Check the handlebar alignment prior to each ride. If the handlebars are loose, re-
tighten the handlebar stem lock screw until the handlebars are secure.