Web UI and CLI Overview
How to set up your FortiWAN
resetpasswd: Reset FortiWAN's Administrator and Monitor passwords to factory default
resetpasswd
System will re-confirm, press
[y]
to proceed or
[n]
to cancel.
setupport: Configure the transmission mode for all the FortiWAN port(s)
setupport show
setupport change <port> auto
setupport change <port> <speed> <mode>
show
:
Show the current transmission modes for all the network ports.
change
:
Change the transmission mode of the specified port to AUTO or specified speed and mode.
<port>
:
The parameter in specifying the port number. The valid values are 1, 2, 3, ...,etc.
<speed>
:
The parameter in specifying the transmission speed. The valid values are 10, 100 and 1000.
<mode>
:
The parameter in specifying the transmission mode. The valid values are half and full.
Example:
setupport show
setupport change 1 auto
setupport change 2 100 full
Note:
Not all network devices support full 100M speed.
This command has no effect on fiber interface.
The
port
is the port number of the FortiWAN port interface; exact number varies according to product models.
shownetwork: Show the current status of all the WAN links available
shownetwork
Display WAN Type, Bandwidth, IP(s) on Local/WAN/DMZ, Netmask, Gateway, and WAN/DMZ Port.
Note: This Console command can only show the current network status. This setting can be changed in the Web UI
under “Network Settings” (See "
Configuring Network Interface (Network Setting)
").
showtrstat: Display tunnel status
showtrstat [TR GROUP NAME]
Display the status of specified tunnel group.
shutdown: Shut the FortiWAN system down
shutdown
This is command is used to shut FortiWAN system down, all the system processes and services will be terminated
normally. Note that this command might not power the appliance off, please turn on/off the power switch or
plug/unplug the power adapter to power on/off the appliance.
FortiWAN Handbook
Fortinet Technologies Inc.
45
Содержание FortiWAN
Страница 1: ...FortiWAN Handbook VERSION 4 2 1...
