Log
Log Control
l
Won precedence over the incompatible peer. Enter the Master state.
l
Preceded by the incompatible peer. Enter the Panic state.
l
Peer heartbeat stopped. Enter the Master state to take over services.
l
Preceded by another Master. Reboot to enter the Slave state.
l
Too Much port down. Reboot to enter the Slave state.
l
Preceded by the incompatible peer. Enter the Panic state.
l
Peer heartbeat stopped. Enter the Master state to take over services.
l
Two Slaves linked at the same time. Restart HA after random delay.
l
Master is gone. Enter the Master state to take over services.
l
Peer heartbeat stopped
l
Time synchronization failed.
l
Configuration synchronization failed.
Log Control
Control sets to forward data from FortiWAN to servers via FTP, E-mail and Syslog (protocol) for archiving and analysis.
Configure log push method one log type by another, or use “Copy Settings to All Other Log Types”. It copies and
applies settings of one log type to others avoiding unnecessary duplicating of settings.
Log Type
:
Select log type to be forwarded to servers.
l
System Log
l
Firewall Log
l
NAT Log
l
Auto & Persistent Routing Log
l
Virtual Server Log
l
BM Log (Bandwidth Management)
l
Connection Limit Log
l
Cache Redirect Log
l
Multihoming Log
l
Backup Line Log
l
Dynamic IP Log
l
IP-MAC Mapping Log
l
Tunnel Routing Log
l
IPSec
Copy Settings to All Other Log Types
:
Copy and apply settings of a log type to other ones.
Method
:
E-Mail, FTP and Syslog
Push Now
:
Click this button and logs are pushed immediately.
Push Log When Out of Space
:
Check Enable to avoid losing data in case of space shortage.
264
FortiWAN Handbook
Fortinet Technologies Inc.
Содержание FortiWAN
Страница 1: ...FortiWAN Handbook VERSION 4 2 1...
