Fortinet FortiWAN, Руководство пользователя

Страница: 43 / 311

Web UI and CLI Overview How to set up your FortiWAN
logout: Exit Console mode
logout
Exit the Console mode. The system will re-confirm, press
[y]
to proceed or
[n]
to cancel.
ping: Test network connectivity
ping <hostname> <link> <index>
Ping a HOST machine to detect the current WAN link status. HOST is the machine/device to be pinged. The LINK
parameter can be WAN, LAN or DMZ. If the LINK is WAN then also specify the WAN port number.
<hostname>
: The parameter in specifying the target IP address or domain name. Note that domain name is valid
only if parameter
<link>
is specified as "
wan
".
<link>
: The parameter in specifying the link or ports that the ICMP PING REQUEST packets are sent through. The
valid values are "
wan
", "
dmz
" and "
lan
".
<index>
:
The parameter in specifying the index of a WAN link if
<link>
is specified as "
wan
". The valid values are
1, 2, 3, ...,etc. (0 for private subnet).
Example:
ping www.hinet.net wan 1
to ping www.hinet.net via WAN #1.
Note: If domain name is used in the
hostname
parameter, DNS Server must be set in the Web UI [System]->
[Network Settings]->[DNS Server] (See "
Set DNS server for FortiWAN
").
For more on ICMP related error messages please refer to other ICMP/PING materials.
reactivate: Reactivate the FortiWAN apparatus
reactivate
Reactivating the FortiWAN apparatus will:
l
Reset all system configurations to factory default (See "
Appendix A: Default Values
" for the details)
l
Return the system to base-bandwidth (See "License Control" in " Administration ")
l
Reset Reports database to factory default. All the report data will be deleted.
Using this command will result in all system data being deleted as well as all bandwidth licenses. Before you attempt a
reactivation, please make sure the following are complete:.
l
Backup any configuration data (See "Configuration File" in " Administration ").
l
Backup Reports database (See "
Reports Database Tool
").
l
Locate your Bandwidth Upgrade Key if your system is not at base bandwidth, so that the bandwidth license the
system had before can be activated by reentering the key.
Note that if your system is not at base bandwidth and you do not have your Bandwidth Upgrade Keys, please contact
Fortinet CSS before attempting a reactivation.
reboot: Restart FortiWAN
reboot [-t <second>]
Restart FortiWAN immediately or restart it after a time period.
FortiWAN Handbook
Fortinet Technologies Inc. 43