manualshive.com logo in svg

Fortinet FortiRecorder 400D, Руководство администратора

Поделиться
Скачать
Fortinet FortiRecorder 400D Скачать руководство пользователя страница 84

Video management

Page 84

FortiRecorder 2.4.2 Administration Guide

External storage

To extend your local storage, you can use an external USB storage device if your FortiRecorder 
model has USB ports. 

To safeguard your surveillance video in the event that your FortiRecorder appliance is destroyed 
by fire, flood, intrusion, or other event that it is recording, configure your FortiRecorder 
appliance to store its video at a remote location such as a branch office or cloud storage 
provider.

To configure external storage

1.

Go to 

System > Storage > External Storage

.

2.

Select the 

Enable

 check box.

3.

Configure these settings: 

It is recommended to connect the remote storage devices on a different interface than the 
cameras. 

Setting name

Description

Protocol

Select one of the following types of storage media:

• External USB 

— External USB device. 

•

iSCSI Server

 — An iSCSI (Internet Small Computer 

System Interface), server. 

•

NFS

 — A network file system (NFS) server.

Note:

 Support for NFS varies. Many Linux-based NAS 

solutions have been tested and are supported. Windows 
2003 R2 and Windows 2008 Service for NFS are not 
supported.

Maximum size

Specify the maximum video file size that is allowed to be 
stored on the external storage device. 

You can view the remote storage usage information on the 

Status

 page under 

Monitor > System Status

. 

Username

Type the user name of the FortiRecorder’s account on the 
server.

Alternatively, if using iSCSI, select 

Initiator name as username

 

to authenticate using a name that follows 

RFC 3721

.

Password

Type the password corresponding to the user name.

Hostname/IP Address

Type either the IP address or fully-qualified domain name 
(such as nas.example.com) of the server.

Port

Type the port number on which the server listens for 
connections.

The default is 2049 for NFS and 3260 for iSCSI.

Содержание FortiRecorder 400D










































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды