Fortinet FortiGate 100A страница 228 Скачать руководство пользователя

Страница: 228 / 374

228

01-28007-0068-20041203

Fortinet Inc.

Configuring protection profiles

Firewall

The following options are available for content archive through the protection profile.

Configuring protection profiles

To add a protection profile

If the default protection profiles do not provide the settings you require, you can create
custom protection profiles.

Go to

Firewall > Protection Profile.

Select Create New.

Enter a name for the profile.

Configure the protection profile options.

Select OK.

To delete a protection profile

Go to

Firewall > Protection Profile

Select the Delete icon beside the protection profile you want to delete.

Select OK.

To edit a protection profile

Go to

Firewall > Protection Profile

Select the Edit icon beside the protection profile you want to modify.

Modify the profile as required.

Select OK.

Display content meta-
information on the system
dashboard

Enable to have meta-information for each type of traffic display

in the Content Summary section of the FortiGate status page.

There you can view statistics for HTTP traffic, FTP traffic, and

Email traffic (IMAP, POP3, and SMTP combined).

Archive content
meta-information

Enable or disable archiving content meta-information to a

FortiLog unit for each protocol. Content meta-information can

include date and time, source and destination information,

request and response size, and scan result. Content archive is

only available if FortiLog is enabled under Log&Report > Log

Config > Log Settings.

Note:

If both Virus Scan and File Block are enabled, the FortiGate unit blocks files that match

enabled file patterns before they are scanned for viruses.

Note:

To change the one-time schedule name you must delete the schedule and add it with a

new name.

Содержание FortiGate 100A























































































































































































































































































































































































Результаты поиска

Содержание FortiGate 100A

Отзывы:

Похожие инструкции для FortiGate 100A

Бренды по названию

Популярные бренды

Fortinet FortiGate 100A, Руководство администратора

Результаты поиска

Содержание FortiGate 100A

Отзывы:

Похожие инструкции для FortiGate 100A

Бренды по названию

Популярные бренды