Fortinet FortiGate 100A, Руководство администратора

Страница: 201 / 374

Firewall Address group list
FortiGate-100A Administration Guide 01-28007-0068-20041203
201
4 Select OK.
To delete an address
Deleting an address removes it from the address list. To delete an address that has
been added to a policy, you must first remove the address from the policy.
1 Go to Firewall > Address > Address .
2 Select the Delete icon beside the address you want to delete.
You cannot delete default addresses.
3 Select OK.
Address group list
You can organize related addresses into address groups to make it easier to
configure policies. For example, if you add three addresses and then configure them
in an address group, you can configure a single policy using all three addresses.
Figure 86: Sample address group list
The address group list has the following icons and features.
Address group options
Address group options are configurable when creating or editing an address group.
Note: To change the address name you must delete the address and add it again with a new
name. To avoid confusion in firewall policies, an address and a virtual IP cannot have the same
name.
Note: If an address group is included in a policy, it cannot be deleted unless it is first removed
from the policy.
Create New Select Create New to add an address group.
Group Name The name of the address group.
Members The addresses in the address group.
The Delete and Edit/View icons.