manualshive.com logo in svg

Fortinet FortiBridge 1000, Руководство по установке

Поделиться
Скачать
Fortinet FortiBridge 1000 Скачать руководство пользователя страница 23

Getting started 

Planning the FortiGate configuration

FortiGate-1000 Installation Guide

01-28004-0025-20040830

 23

You can connect up to six network segments to the FortiGate unit to control traffic 
between these network segments.

• External can connect to the external firewall or router. 
• Internal can connect to the internal network.
• Port 1, 2, and 3 can connect to other network segments. 
• Port 4/HA can connect to another network segment. Port 4/HA can also connect to 

other FortiGate-1000 units if you are installing an HA cluster.

Configuration options

Once you have selected Transparent or NAT/Route mode operation, you can 
complete the configuration plan and begin to configure the FortiGate unit.

You can use the web-based manager GUI, the control buttons and LCD, or the 
command line interface (CLI) for the basic configuration of the FortiGate unit. You can 
use the web-based manager setup wizard for easy configuration of a few more 
advanced settings.

Web-based manager

You can configure most basic and advanced setting from the web-based manager 
GUI.

CLI

If you are configuring the FortiGate unit to operate in NAT/Route mode, you can add 
the administration password and all interface addresses using the CLI. You can also 
add DNS server IP addresses and a default route for the external interface.

If you are configuring the FortiGate unit to operate in Transparent mode, you can use 
the CLI to switch to Transparent mode. Then you can add the administration 
password, the management IP address and gateway, and the DNS server addresses.

Front control buttons and LCD

If you are configuring the FortiGate unit to operate in NAT/Route mode, you can use 
the control buttons and LCD to add the IP address of the FortiGate interfaces as well 
as the external default gateway.

If you are configuring the FortiGate unit to operate in Transparent mode, you can use 
the control buttons and LCD to switch to Transparent mode. Then you can add the 
management IP address and default gateway.

Содержание FortiBridge 1000

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды