Installation
8
FortiFone™ QuickStart Guide
Provisioning the Phone
For instructions on programming your FortiVoice phone system for the
phone, refer to “Adding IP Phones” in Chapter 2 of the
FortiVoice User
Guide
.
For internal use
The phone supports ‘plug and play’ installation employing the automated
provisioning process for discovering FortiVoice phone systems.
After discovering the FortiVoice system on the LAN, the phone downloads
the configuration and registers with FortiVoice. If the extension was
pre-configured via the FortiVoice management software, then the phone
display should show the extension number and name. If not yet configured
in the FortiVoice system, then the MAC address of the phone will be visible
as a choice in the MAC select list for that model of phone in the Local
Extensions section of the configuration.
For external use
When connecting your IP phone at a remote location for external use,
perform the following steps:
1.
Preconfigure the extension in the FortiVoice management software.
2.
Power up the phone and press the
button, then go to
3. Phone
Settings
.
3.
Go to
7. Firmware Update
and press the
Select
softkey.
4.
From the
Firmware Update
menu, select
2. TFTP Server Address
.
5.
Enter the Public IP address or FQDN of your FortiVoice system. Press
the
OK
softkey.
6.
Press the
button to exit the configuration then press the
Yes
softkey to reboot the phone.
Содержание FON-350i
Страница 1: ...FortiFone QuickStart Guide for FON 350i 360i...
Страница 20: ......
