FORTEZA JSC
FORTEZA FM-30(24)-BT
Please visit our internet sites:
the cover 6 to get the access to the adjustment and indication elements. The sensor is
connected to the receiving-control device with cable 8 stretched through cable gland14 and
corrugated pipe 7.
6.2 The transceiver unit is mounted on support 1 with bracket and buckles 13 as shown in
fig. 6.1. If you use some supports of the diameter more than 90 mm, apply the buckles with a
bigger diameter (width of 12 mm max). The mounting kit ST-1 provides the unit turn on
horizontal plane for 360 º, on vertical plane: up -15º minimum, down - 40º minimum.
6.3 The transceiver unit is mounted on a vertical plane (wall, fence, etc.) with the bracket:
bracket 2 as shown in fig.6.2 or 6.3. The rotation angles on the bracket on a horizontal plane
are 180º, on a vertical plane: up - 17º, down - 45º. There are 3 types of the bracket: indented
from a wall at the distance of 120 mm, 350 mm and 500 mm. The type of the bracket
depends on the sensor application.
6.4 The transceiver unit is mounted along the wall and other long surfaces with the brackets
installed at 350 mm from the wall. It is necessary to do it because of absorption and
reflection from the wall the sensor technical characteristics can worsen.
