Fortex MPP1, Руководство по эксплуатации

Страница: 15 / 16

15
Maintenance
The manipulator does not require special maintenance. Make sure that the round rod of movable
armrest is neither covered in dust nor messed with various impurities. It must be kept lightly oiled.
Larger impurities (metal or wood sawdust etc.) can damage linear bearing. The assembling needle
must be cleaned from solder paste after work, because later cleaning can be problematic if the paste
dries up.
The assembling head is maintenance-free, no further lubrication is required. Improper intervention can
damage the assembling head, e.g. non-linear movement may occur or excessive oiling can leak and
degrade the PCB.
Always keep the feeders dust-free and it is recommended that you clean the sliders from dust before
use to prevent them from sticking to the IC´s pins.
Service
In case of manipulator failure, please contact the dealer or the device manufacturer. Only original
spare parts available from the manufacturer must be used for repair.
Do not repair in any case the
manipulator yourself.
Disposal
Dispose of the packaging in an environmentally friendly manner. It is made of ecological materials,
which can either be recycled or disposed of in local waste recycling site.
Do not dispose of electrical tools in the municipal waste. Dispose of electronic tools in accordance
with European directive no. 2012/19/EU, which states that worn out electronic tools and devices must
be collected separately and handed in for ecological recycling.
To get more information about disposal of worn out electronic devices, please inquire at the relevant
public administration body.
We reserve the right to make any changes in the operating manual of the device.