Declaration of Conformity
29
11. Declaration of Conformity
Declaration
Hereby the Distec GmbH declared that the unit EU is in compliance with the essential requirements and other relevant provisions of
Directives 2014/30/EU and 2014/35/EU and 2011/65/EU.
If a CE declaration of conformity is required, please request it from support on our website:
https://www.distec.de/en/service/techni-
FCC Declaration of conformity
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Canadian Department of Communications Compliance Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Observation des normes-Class A - Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC Information:
•
Changes or modifications not expressly approved by Distec GmbH could void the user’s authority to operate the equipment.
•
Use the attached specified cables with the POS-Line monitor so as not to interfere with radio and television reception.
• Please use the supplied power cord or equivalent to ensure FCC compliance.
•
Please use the supplied shielded video signal cable, Mini D-SUB 15 pin to Mini D-SUB.
