XTRA-Line Bartype 37 IoT
23
7.
XTRA-Line Bartype 37 IoT
The XTRA-Line Bartype 37 IoT monitor is equipped with the Raspberry
®
Pi compute module 3+ (CM3+). The specification can be found
under the following link:
https://www.raspberrypi.org/products/compute-module-3-plus/
Note:
The full driver package for the IoT monitor can be found on our website:
https://www.distec.de/en/service/downloads/
The device is equipped with a battery. Please note the following:
•
Disconnect the devise from the power supply before replacing the battery.
•
If the battery is not replaced properly there is a risk of explosion.
•
Always replace the battery with another one of the same type.
•
Supply empty batteries to the local waste battery return system. Please also observe the notes in chapter „Disposal“.
Passive cooling
Monitors of the XTRA-Line Bartype 37 IoT series are equipped with a passive cooling system. Passively cooled monitors divert the
heat of the processor to the monitor‘s housing. Passively cooled devices have no moving parts.
Spezification
Please refer to the current data sheet for the details of the IoT monitor specification.
Connectors of XTRA-Line Bartype 37 IoT series
Connecting to a network using a patch cable
LAN
LAN
HDMI IN
LAN
Line-out
USB
USB
Micro-SD card
Reset Button
LED
OSD Keyboard
Power Supply
On/ off button
OSD Keyboard
OSD Keyboard
USB (IoT)
