First Installation
10
Mounting on wall
Distance to wall:
• device without integrated PC: min.10 mm
Mounting with VESA compatible brackets
The XTRA-Line bartype monitors are optionally supplied with mounting brackets. Alternatively, the monitor can be mounted with the
wall bracket in landscape and portrait format. When using the wall bracket, the prescribed clearances to the rear of the monitor are
observed.
The operating position of the device is perpendicular (90 degrees to the floor). Pay attention to the permissible tilt angle for wall
mounting.
The device can be operated both in landscape mode and in portrait mode. The information is for positioning to note on the back of the
device, always.
The wall bracket is designed for the load of the monitor including the options offered. Additional parts / components
that are not available as an option for the XTRA-Line Bartype 37 must not be installed when using the wall bracket.
For fastening to the VESA brackets, use 4 metal screws of size M6x25.
VESA standards:
MIS-F 400 x 400 mm (M6)
A
B
C
D
D
C
A: 50 mm
B: 50 mm
C: 10 mm/ 40 mm
C: 10 mm/ 40 mm
D: 0 mm
Seitenansicht
Ansicht von oben
oben
unten
VESA srewing points
