First Installation
8
4.
First Installation
Position of connectors and controls
All connectors for power and cables are located at the bottom of the back side of the display.
Connection for power cable and on / off switch
Data cable connectors, OSD menu buttons,
Mounting
Distance to wall:
• devices without integrated PC: min.10 mm
• devices with integrated PC: min. 40 mm
Mounting with VESA compatible brackets
Brilan 4K displays are shipped with factory installed with VESA compatible mounting holes. The monitor can be mounted with every
VESA compatible wall mount, whose load capacity matches the weight of the monitor. For mounting must be used 4 metal srews M6
for 43“ and M8 for 74.5“.
The operating position of the device is perpendicular (90 degrees to the floor). Pay attention to the permissible tilt angle for wall
mounting. The device can be operated both in landscape mode and in portrait mode. The information for
positioning is noted on the back of the device, always.
VESA standards 43“: MIS-F 400 x 400 mm (M6)
VESA standards 74.5“: MIS-F 800 x 400 mm (M8)
A
B
C
D
D
C
A: 50 mm
B: 50 mm
C: 10 mm/ 40 mm
C: 10 mm/ 40 mm
D: 0 mm
Seitenansicht
Ansicht von oben
oben
unten
